In addition to the pump body and motor, the key part of Zui is the magnetic actuator. The magnetic actuator consists of inner and outer magnetic rotors and spacers. Because the pump shaft, inner magnetic rotor and isolation sleeve are completely sealed, the leakage problem of "running, emitting, dripping and leaking" of the traditional stainless steel magnetic pump is solved.

As the stainless steel magnetic pump is widely used in many industries, and many of these industries transport flammable or toxic liquids, leakage will cause danger and even Zi explosion. Therefore, the sealing performance of the stainless steel magnetic pump greatly enhances the safety of the workplace and ensures the health of employees.

If we use any machine for a long time, there will be potential safety hazards without maintenance, so we should regularly check the stainless steel magnetic pump to ensure safety. The stainless steel magnetic pump will have some faults after long-term use. What are the common problems?

1、 Bearing damage of stainless steel magnetic pump. There are many reasons for bearing damage, such as water or impurities in the pump, or a wide range of friction between machine parts.

2、 Stainless steel magnetic pump can not pump liquid. This is the magnetic pump is particularly prone to a problem. First, check the pump body for air leakage, and pay attention to whether the suction height of the pump is too high. If it is not feasible, the pump can be disassembled to check where the problem occurs, or the after-sales service can find the manufacturer to solve it.

3、 Insufficient or reduced flow. The main reason is that the impeller is damaged, the speed is slow or there are sundries in the pump body.

4、 Insufficient lift .There are many reasons. For example, there is air in the pump body, the impeller is damaged, the rotating speed is substandard, the proportion of transmitted liquid is too large, and the flow is too large.

5、 The shaft of the magnetic pump is broken. The main reason for the fracture of the pump shaft is the idling and dry running of the magnetic pump. So the solution is to avoid the stainless steel magnetic pump idling.